Tuesday, April 5, 2011
Washing car engine management tips
This is your engine and air filters, distributors, coils, and oil dipstick / Brakes, including air intake in. You do not want to get some water to cover; we recommend the adoption of the motor during cooling. You Baggies and rubber bands to cover the holes can be used. You can also cap oil filter, power steering cap, glass cap washer fluid, battery filler caps and check the tightness of all the other hats would.
Now all you have, then spray the engine compartment seal, engine warm and machine with high-quality non-petroleum based degreaser. You will not be covered in your face degreaser that, starting from the bottom up to work.
Degreaser for about 3-5 minutes, and then remove a large area to start a dirty 100% cotton towel or use a soft brush is acceptable. Then again, spray again, what part you need additional cleaning brush. All machines are thoroughly cleaned and the engine compartment after the water washed it. I will work with your high-pressure sprayer and spray without the uses of soft delicate point you should not worry about getting in the water.
Remove rubber bands and plastic bags and to clean the engine compartment. Then, with some standing water, aluminum, soft towel to dry. Use paper towels to dry the battery. You can now start the engine and warm up. This is the rest of the machine and dry to evaporate the water has been collected.
After drying everything, you need to wax the engine compartment to the green fields, but the engine to cool completely. Finish undercoated aluminum case so you can restore dull or lightweight metal corrosion with some white polish. Currently, they clean the battery terminals should be. They you unplug the cable, wire brush, and clean both terminals and battery posts if you do not.
If so, you need them with silicone lubricant, a thin layer of rain for all to see the hinges, throttle cables and the impact should. So, check all fluid levels and to remove any stray Baggies have completed cleaning your machine.